Case Study of Millennium Point
| Client: |
Millennium Point |
| Contractor: |
Haden Young Ltd |
| Products: |
Inertia Bases and EPDM Bellows |
Millennium Point is a multi-tenanted
complex that houses Thinktank, Birmingham’s award winning
science museum, the IMAX, the Midlands’ only large format
cinema, Technology Innovation Centre, a world-class university faculty
and various commercial tenants.
Haden Young were appointed design and build contractors for the
mechanical services, and as part of the package there was a need
to control the noise and vibration transmitted from plant room equipment.
Due to the complexity of the
layout of the plant room, J&P Supplies designed and provided
the 6 bespoke inertia bases on which the heating and chilled water
pumps are mounted.
The inertia bases measured
between 3 metres and 4 metres in length, by over 1 metre in width,
and were designed to have four pumps mounted on each.
 All
STOURFLEX®
inertia bases are manufactured from fully welded steel frames with
internal reinforcement, and are coated with corrosion resistant
epoxy paint finish. J&P Supplies also provided over forty EPDM
Tied Rubber Bellows to further reduce noise transmission on the
pumps.
 J
& P Supplies Ltd provides a complete design service. This includes
free technical advice, site surveys and after sales support.
 Return
to Case Studies Index
|
