Tied Rubber Bellows. Food Quality (White).
Now Available With Precision Fit Flexible Lagging Jackets To Suit JP08.
Specification:
Tied rubber bellows consisting of nitrile liner and neoprene cover with nylon reinforced body and steel reinforced collar. Fitted with zinc plated carbon steel oval flanges complete with fully threaded tie bars and rubber top hat washers. Drilled to BS. 4504 NP16.
Application:
Stourflex tied rubber bellows are designed to accommodate misalignment and lateral movement. They are also used to reduce noise and vibration from pumps and reciprocating machinery. The taste and odour free rubber used in the construction of the Type JP08 enables this bellows to be used for food and beverage production. L.T.H.W. – 82°C/71°C Maximum working pressure 10 bar. C.H.W. – 6°C/12°C Maximum working pressure 16 bar. Stourflex rubber bellows should not be used at both their maximum working temperature and pressure respectively. Maximum test pressure = 1.5 x working pressure or 1.5 x flange rating, whichever the lower.
Lagging:
Stourflex are now able to offer a tailor made flexible lagging jacket to help reduce heat losses on LTHW systems and heat gains & condensation on CHW systems. Please ask for more information
Supplied length may vary. Tolerance +/-5%
Vacuum support ring fitted on request.
Sizes above 300mm N.B. are available on request.
Where vacuum conditions or pressures and temperatures above those stated exist, please check with us the suitability of and effects on service life of Stourflex products.
Alternative flange drillings and materials are available on request.
Stourflex products should be installed in accordance with our fitting instructions.
Stourflex rubber bellows should be periodically inspected and replaced if any deterioration is evident
Download: Data Sheet and Installation Guide
Tel: 01384 393329
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.